jeff need some gasket prices from you bro

[tlmaniac]

i have no idea when this kid wil have the money to get them so if you dont have them in stock i wouldnt worry about breaking your neck to get them. i need the lower intake to head gaskets for a 1990 300zx na as well as the plenum to lower intake gasket for the same car. i would get you part numbers but for some reason my fast program dosent have the z32 model in it.

[Bodean]

The two lowers are 70.99 each!! the upper plenum is 7.41.

159.10 total ouch!!!!!

[Bodean]

And for god sakes dude, if I don't post a reply same day hit me with a PM!!

[tlmaniac]

omg what are those gold plated? i bought a set of gaskets from japan and had them for less with shipping lol! well i know you give the best prices arround cause that plenum gasket here is $23. hey quick question how much could you get an efi harness for the same car? kid has massive shorts in the one in the car and got one that was cut from an auto and his car is manual. i dont feel like splicing the shielded wires so a new harness from the computer to engine bay would make life much much easier.

[Bodean]

Hit6 me with the VIN or get me the PN# off a little white tag near the main junction. Probably starts with 24077-

[Bodean]

Hit6 me with the VIN or get me the PN# off a little white tag near the main junction. Probably starts with 24077-

[tlmaniac]

ok buddy no tag on the harness anymore so here is the vin JN1RZ24A7LX011457

also need a detonation sensor and subharness as well his was remade out of speaker wire lol

anything else you can tell me about the car from that vin would be a plus since this thing has been abused badly in its life time.

also i have its twin here too did an injector change and i told the kid to get oem injector seals well he got them from pepboys and i now have 3 cyclinders just dumping fuel so im thinking the elcheapo o rings rolled or ripped so i need a set of injector seals if you could price those for me as well ill prolly end up getting 2 sets one now and one later for the car that needs a harness. its pretty sad when you plug in the clearance illumination fuse and smoke starts rising from every hole in the dash. i gots some work to do on that one. i think i went a lil cheap at 450 to re do the wrong timing belt and fix his harness as well as replace every piece of rubber hose under the hood.

[Bodean]

The knock sensor is 128.68 (I think that may be half that aftermarket) the small EGI harness that connects to it is 24.88. The engine wiring harness is 348.32 with a list of 464.42 so yes 450.0 for this whole job was a little cheap. lol

Lower oring is 2.23 and the upper is1.65 each. There is also a little insulator for a 1.67 each.

[tlmaniac]

thanks ill let them know what the prices are. the price i gave him dosent include parts at all that is just labor for sorting out all of the shorts in the car and reset the timing belt.