PDA

View Full Version : Electric Window Problems

WhiteNite
06-22-2008, 08:25 PM
Got a problem here. On the drivers side controls I think the switch for the back two windows is going/gone bad. I can roll the back ones down but rolling them up is "iffy". It acts like it is not giving the signal to the window motors to roll the windows up. BUT they work fine on the back door controls, its just on the drivers side controls. Any ideas?
gtcompscientist
06-23-2008, 08:35 AM
What year is your truck? Because at one point I remember reading about either a recall or a TSB about the wiring between the front and the back getting chewed up from the doors opening and closing. It was known to cause problems with the speakers, and it wouldn't surprise me if it also caused your issue.
WhiteNite
06-23-2008, 09:10 AM
Its an 05 CC LE. Been acting up for a little while now but really bad now.
gtcompscientist
06-23-2008, 09:40 AM
Yeah, my first thought would be to check those wires. It might be something that you would be able to see with the naked eye. Are you still under warranty, by any chance?
WhiteNite
06-23-2008, 09:42 AM
yeah but its the extended so it probably dont cover it...
gtcompscientist
06-23-2008, 10:21 AM
My first suggestion, if you have the extended warranty, is to take it to the dealership and see what they say. Because if it's covered, then you don't have to worry about anything.
WhiteNite
06-23-2008, 10:38 AM
Thanks man! I sent this link to Jody also to get his info on the warranty side. I hate our local dealer so I wanted to see what he says on the warranty side. The wires you were talking about, they are in the door jam?
nascarjody
06-23-2008, 10:55 AM
PM sent
Bodean
06-23-2008, 02:09 PM
I would have said your regulators are bad but it's hard to tell from this vantage point lol. That should be covered under your extended.
WhiteNite
06-23-2008, 05:27 PM
Hmm....I hope it is covered. I guess Ill just make me an apt. with the stealership. I cant stand them by the way.....
MikeD1
06-23-2008, 06:33 PM
Sure sounds like the driver controls are not working for some reason. Not sure how hard they are to get to, but if it's within your comfort zone you could test them with a volt meter to see if they are sending power when activated. That would isolate if it's the switchs or something in the wiring as Charles suggested.

If it were the regulator, I'd expect the windows to be balky even when using the controls from the back.
Bodean
06-23-2008, 08:35 PM
BUT they work fine on the back door controls, its just on the drivers side controls. Any ideas?



Sorry. Didn't read the whole post. Yes I would say the 25401-ZJsomethingorother is bad. I think its a ZJ20A but don't quote me.
WhiteNite
06-23-2008, 09:42 PM
Sorry. Didn't read the whole post. Yes I would say the 25401-ZJsomethingorother is bad. I think its a ZJ20A but don't quote me.

umm....so what is that? lol and how hard to change cause its probably not under warranty is it?
Bodean
06-25-2008, 12:28 PM
yeah but its the extended so it probably dont cover it...



Shoot me your vin or let me know more about your warrenty and I can check and see if its covered. 25401-ZJ30A and it's 93.41 to members. Master window switch.
Bodean
10-01-2008, 11:20 AM
yeah but its the extended so it probably dont cover it...



Shoot me your vin or let me know more about your warrenty and I can check and see if its covered. 25401-ZJ30A and it's 93.41 to members. Master window switch.


Every month I get a price update from Nissan. This particular part has climbed to 104.39 for members.
WhiteNite
10-01-2008, 01:07 PM
yeah but its the extended so it probably dont cover it...



Shoot me your vin or let me know more about your warrenty and I can check and see if its covered. 25401-ZJ30A and it's 93.41 to members. Master window switch.


Every month I get a price update from Nissan. This particular part has climbed to 104.39 for members.

WOW!....That was a little bit of a jump from the 1 I got from you